| Sizes | 4", 6", 8", 10", 12" |
|---|
The installation of the Hydra-Stop Insta-Valve 250 insertion valve is accomplished through a single circular hole — commonly known as a “tap” — cut under full line pressure into the top of the pipe without the need to ream or sever the pipe. By installing the Insta-Valve 250 right where a control point is needed, you gain a permanent asset allowing system control and maintenance in the same manner as a resilient seated gate valve.
The Insta-Valve 250 is available in 4″ through 12″ diameters.
Yes. The Insta-Valve 250 can be installed in any position on the pipe.
Yes. The Insta-Valve 250 can be installed on all common types of pipes, including AC, CI, DI and PVC pipe.
Only one small excavation is needed to install the Insta-Valve 250, requiring an excavation size as little 5′ x 5′.
Yes. The Insta-Valve 250 can be installed in as little as one hour. Simply mount the Insta-Valve 250 valve body, make a simple tap with your Hydra-Tapper™ and install your Insta-Valve 250 valve cartridge.
The Insta-Valve 250 seals in three ways: throat gasket, wipe seal and valve paddle. Working together, these seals optimize the sealing characteristics of the Insta-Valve 250, providing the best performance and reliability of any valve insertion technology available today.
Yes, the Insta-Valve 250 is a permanent valve designed to provide years of trouble-free operation.
